Tesla MCP Server

Tesla MCP Server

Streamable HTTP MCP server for Tesla vehicle control via the Tessie API.

Author: overment

[!WARNING]You connect this server to your MCP client at your own responsibility. Language models can make mistakes, misinterpret instructions, or perform unintended actions. Always verify commands before execution, especially for actions like unlocking, opening trunks, or sending navigation destinations.

The HTTP layer is designed for convenience during development, not production-grade security. If deploying remotely, harden it: proper token validation, secure storage, TLS termination, strict CORS/origin checks, rate limiting, and audit logging.

Notice

This repo works in two ways:

• As a Node/Hono server for local workflows
• As a Cloudflare Worker for remote interactions

Features

• ✅ State — Battery, range, location, climate, doors, charging status
• ✅ Commands — Lock/unlock, climate, trunks, sentry, navigation
• ✅ Location-aware — GPS coordinates for context-aware interactions
• ✅ Dual Runtime — Node.js/Bun or Cloudflare Workers

Design Principles

• LLM-friendly: Two unified tools, not 1:1 API mirrors
• Watch-ready: Designed for AI agents with location context
• Secure: Tessie API key stored as secret, clients use separate bearer token
• Clear feedback: Detailed command results and vehicle state

Installation

Prerequisites: Bun, Tessie Account.

Ways to Run (Pick One)

1. Local Development — Standard setup with bearer token auth
2. Cloudflare Worker (wrangler dev) — Local Worker testing
3. Cloudflare Worker (deploy) — Remote production

1. Local Development — Quick Start

1. Get Tessie credentials:

   • Visit developer.tessie.com
   • Go to Developer Settings → Generate Access Token
   • Copy your access token
   • Note your vehicle's VIN

2. Configure environment:

cd tesla-mcp
bun install
cp .env.example .env

Edit .env:

PORT=3000
AUTH_ENABLED=true
AUTH_STRATEGY=bearer

# Generate with: openssl rand -hex 32
BEARER_TOKEN=your-random-auth-token

# Tessie credentials
TESSIE_ACCESS_TOKEN=your-tessie-access-token
TESSIE_VIN=your-vehicle-vin

3. Run:

bun dev
# MCP: http://127.0.0.1:3000/mcp

Claude Desktop / Cursor:

{
  "mcpServers": {
    "tesla": {
      "command": "npx",
      "args": ["mcp-remote", "http://localhost:3000/mcp", "--transport", "http-only"],
      "env": { "NO_PROXY": "127.0.0.1,localhost" }
    }
  }
}

2. Cloudflare Worker (Local Dev)

bun x wrangler dev --local | cat

Create .dev.vars for local secrets:

BEARER_TOKEN=your_random_auth_token
TESSIE_ACCESS_TOKEN=your_tessie_token
TESSIE_VIN=your_vehicle_vin

Endpoint: http://127.0.0.1:8787/mcp

3. Cloudflare Worker (Deploy)

1. Create KV namespace for session storage:

bun x wrangler kv:namespace create TOKENS

Output will show:

Add the following to your wrangler.toml:
[[kv_namespaces]]
binding = "TOKENS"
id = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

2. Update wrangler.toml with your KV namespace ID:

[[kv_namespaces]]
binding = "TOKENS"
id = "your-kv-namespace-id-from-step-1"

3. Set secrets:

# Generate a random token for client authentication
openssl rand -hex 32
bun x wrangler secret put BEARER_TOKEN
# Paste the generated token when prompted

# Tessie API credentials
bun x wrangler secret put TESSIE_ACCESS_TOKEN
# Paste your Tessie token when prompted

bun x wrangler secret put TESSIE_VIN
# Paste your VIN when prompted

4. Deploy:

bun x wrangler deploy

Endpoint: https://<worker-name>.<account>.workers.dev/mcp

Client Configuration

Alice App

Add as MCP server with:

• URL: https://your-worker.workers.dev/mcp
• Type: streamable-http
• Header: Authorization: Bearer <your-BEARER_TOKEN>

Claude Desktop / Cursor (Local Server)

{
  "mcpServers": {
    "tesla": {
      "command": "npx",
      "args": ["mcp-remote", "http://127.0.0.1:3000/mcp", "--transport", "http-only"],
      "env": { "NO_PROXY": "127.0.0.1,localhost" }
    }
  }
}

Claude Desktop / Cursor (Cloudflare Worker)

{
  "mcpServers": {
    "tesla": {
      "command": "npx",
      "args": ["mcp-remote", "https://your-worker.workers.dev/mcp", "--transport", "http-only"]
    }
  }
}

MCP Inspector (Quick Test)

bunx @modelcontextprotocol/inspector
# Connect to: http://localhost:3000/mcp (local) or https://your-worker.workers.dev/mcp (remote)

Tools

tesla_state

Get the current state of your Tesla vehicle.

// Input
{}

// Output
{
  display_name: string;           // Vehicle name
  battery_level: number;          // 0-100%
  battery_range_km: number;       // Estimated range in km
  charging: {
    state: string;                // "Disconnected", "Charging", "Complete", "Stopped"
    minutes_remaining: number | null;
    charge_limit: number;         // Charge limit %
  };
  location: {
    latitude: number;
    longitude: number;
    heading: number;              // 0-359°
    speed: number | null;         // km/h or null if parked
  };
  locked: boolean;
  sentry_mode: boolean;
  climate: {
    is_on: boolean;
    inside_temp: number;          // °C
    outside_temp: number;         // °C
    target_temp: number;          // °C
    is_defrosting: boolean;
  };
  doors: {
    front_left: boolean;          // true = open
    front_right: boolean;
    rear_left: boolean;
    rear_right: boolean;
    frunk: boolean;
    trunk: boolean;
    charge_port: boolean;
  };
  state: "online" | "asleep" | "offline";
  odometer_km: number;
  last_updated: string;           // ISO 8601
}

tesla_command

Execute commands on your Tesla vehicle.

// Input
{
  command: "lock" | "unlock" | "start_climate" | "stop_climate" |
           "set_temperature" | "start_defrost" | "stop_defrost" |
           "open_frunk" | "open_trunk" | "open_charge_port" |
           "close_charge_port" | "enable_sentry" | "disable_sentry" |
           "flash" | "honk" | "share";
  temperature?: number;           // Required for set_temperature (15-28°C)
  destination?: string;           // Required for share
  locale?: string;                // Optional for share (e.g., "en-US")
}

// Output
{
  success: boolean;
  command: string;
  message: string;
}

Commands Reference:

Examples

1. Get vehicle state

{
  "name": "tesla_state",
  "arguments": {}
}

2. Lock the car

{
  "name": "tesla_command",
  "arguments": {
    "command": "lock"
  }
}

3. Set temperature to 22°C

{
  "name": "tesla_command",
  "arguments": {
    "command": "set_temperature",
    "temperature": 22
  }
}

4. Start climate before leaving

{
  "name": "tesla_command",
  "arguments": {
    "command": "start_climate"
  }
}

5. Navigate to a destination

{
  "name": "tesla_command",
  "arguments": {
    "command": "share",
    "destination": "Golden Gate Bridge, San Francisco"
  }
}

Authentication Flow

┌─────────────────────────────────────────────────────────────────┐
│  Client (Alice App, Claude Desktop)                             │
│      │                                                          │
│      │ Authorization: Bearer <BEARER_TOKEN>                     │
│      ▼                                                          │
│  ┌─────────────────────────────────────────────────────────┐   │
│  │  Cloudflare Worker / Node.js Server                      │   │
│  │                                                          │   │
│  │  1. Validate BEARER_TOKEN (client auth)                  │   │
│  │  2. Use TESSIE_ACCESS_TOKEN (internal API key)           │   │
│  │                                                          │   │
│  │  env.TESSIE_ACCESS_TOKEN ──┐                             │   │
│  │  env.TESSIE_VIN ───────────┼──► TessieClient             │   │
│  │                            │         │                   │   │
│  │                            │         ▼                   │   │
│  │                            │   api.tessie.com            │   │
│  └─────────────────────────────────────────────────────────┘   │
└─────────────────────────────────────────────────────────────────┘

Key points:

• BEARER_TOKEN: Random token you generate — authenticates clients to your MCP server
• TESSIE_ACCESS_TOKEN: Your Tessie API key — used internally by the server
• Clients never see your Tessie credentials

HTTP Endpoints

Development

bun dev           # Start with hot reload
bun run typecheck # TypeScript check
bun run lint      # Lint code
bun run build     # Production build
bun start         # Run production

Architecture

src/
├── shared/
│   └── tools/
│       ├── tesla-state.ts      # Get vehicle state
│       └── tesla-command.ts    # Execute commands
├── services/
│   └── tessie.service.ts       # Tessie API client
├── schemas/
│   ├── commands.ts             # Command definitions
│   ├── outputs.ts              # Tool output schemas
│   └── tessie.ts               # Tessie API response schemas
├── config/
│   └── metadata.ts             # Server & tool descriptions
├── index.ts                    # Node.js entry
└── worker.ts                   # Workers entry

Environment Variables

Node.js (.env)

Cloudflare Workers (wrangler.toml + secrets)

wrangler.toml vars:

AUTH_ENABLED = "true"
AUTH_STRATEGY = "bearer"

Secrets (set via wrangler secret put):

• BEARER_TOKEN — Random auth token for clients
• TESSIE_ACCESS_TOKEN — Tessie API access token
• TESSIE_VIN — Your vehicle's VIN

KV Namespace:

[[kv_namespaces]]
binding = "TOKENS"
id = "your-kv-namespace-id"

Troubleshooting

Debugging

Test with MCP Inspector:

bunx @modelcontextprotocol/inspector
# Connect to your endpoint and test tools

Check Worker logs:

wrangler tail

License

MIT